149 lines
4.8 KiB
OpenSCAD
149 lines
4.8 KiB
OpenSCAD
// --- Parameters ---
|
|
columns = 4; // Numpad Width
|
|
rows = 6; // Numpad Height
|
|
switch_spacing = 19.05;
|
|
switch_outer_width = 14.2;
|
|
switch_total_height = 14.2;
|
|
margin = 5.0;
|
|
|
|
plate_w = (columns - 1) * switch_spacing + switch_outer_width + (margin * 2);
|
|
plate_h = (rows - 1) * switch_spacing + switch_total_height + (margin * 2);
|
|
|
|
// --- Plate ---
|
|
plate_thickness = 1.5;
|
|
plate_slack = 0.15;
|
|
recess_depth = 2.5;
|
|
|
|
// --- Case Dimensions ---
|
|
case_angle = 5;
|
|
wall_thickness = 4.0;
|
|
front_height = 18.0;
|
|
clearance = 0.25;
|
|
floor_thickness = 4.0;
|
|
rim_extra_height = 3.0;
|
|
|
|
pillar_dia = 5;
|
|
|
|
case_w = plate_w + (wall_thickness * 2) + (clearance * 2) - 2;
|
|
case_h = (plate_h * cos(case_angle)) + (wall_thickness * 2) + (clearance * 2) - 2 * cos(case_angle);
|
|
|
|
back_height = front_height + (tan(case_angle) * case_h);
|
|
|
|
// --- USB-C and Controller Holder ---
|
|
usb_w = 12.0;
|
|
usb_h = 6.5;
|
|
usb_x_offset = (case_w / 2) - (usb_w / 2);
|
|
usb_z_pos = floor_thickness;
|
|
|
|
holder_x = 20.0;
|
|
holder_y = 35.0;
|
|
holder_height = 5.0;
|
|
holder_wall = 2.0;
|
|
|
|
// --- Clips ---
|
|
clip_width = 10.0;
|
|
clip_depth = 1.5;
|
|
clip_height = 1.5;
|
|
|
|
module controller_holder() {
|
|
x_pos = (case_w / 2) - (holder_x / 2) - holder_wall;
|
|
y_inner_wall = case_h - wall_thickness;
|
|
y_pos = y_inner_wall - holder_y - holder_wall;
|
|
|
|
translate([x_pos, y_pos, floor_thickness]) {
|
|
difference() {
|
|
cube([holder_x + (holder_wall * 2), holder_y + holder_wall, holder_height]);
|
|
translate([holder_wall, holder_wall, -0.1])
|
|
cube([holder_x, holder_y + 0.1, holder_height + 0.2]);
|
|
}
|
|
}
|
|
}
|
|
|
|
module usb_cutout() {
|
|
translate([usb_x_offset, case_h - wall_thickness - 1, usb_z_pos])
|
|
cube([usb_w, wall_thickness + 2, usb_h]);
|
|
}
|
|
|
|
module angled_clip() {
|
|
color("red")
|
|
rotate([case_angle, 0, 0])
|
|
cube([clip_width, clip_depth, clip_height]);
|
|
}
|
|
|
|
module support_pillars() {
|
|
col_gaps = [1, 3];
|
|
row_gaps = [1, 3, 5];
|
|
|
|
plate_start_x = (case_w - plate_w)/2 - 2;
|
|
plate_start_y = (case_h - (plate_h * cos(case_angle)))/2 - 2 * cos(case_angle);
|
|
|
|
intersection() {
|
|
union() {
|
|
for (c = col_gaps) {
|
|
for (r = row_gaps) {
|
|
x_pos = plate_start_x + margin + (c * switch_spacing);
|
|
y_pos_flat = margin + (r * switch_spacing);
|
|
y_pos = plate_start_y + (y_pos_flat * cos(case_angle));
|
|
|
|
translate([x_pos, y_pos, 0])
|
|
cylinder(d = pillar_dia, h = back_height + 10, $fn = 32);
|
|
}
|
|
}
|
|
}
|
|
translate([0, plate_start_y, front_height - recess_depth])
|
|
rotate([case_angle, 0, 0])
|
|
translate([-50, 0, -500])
|
|
cube([case_w + 100, plate_h, 500]);
|
|
}
|
|
}
|
|
|
|
module case_full_geometry() {
|
|
clip_z_offset = plate_thickness + plate_slack;
|
|
recess_w = plate_w + (plate_slack * 2);
|
|
recess_h = plate_h + (plate_slack * 2);
|
|
|
|
union() {
|
|
difference() {
|
|
// Shell
|
|
polyhedron(
|
|
points=[
|
|
[0,0,0], [case_w,0,0], [case_w,case_h,0], [0,case_h,0],
|
|
[0,0,front_height + rim_extra_height], [case_w,0,front_height + rim_extra_height],
|
|
[0,case_h,back_height + rim_extra_height], [case_w,case_h,back_height + rim_extra_height]
|
|
],
|
|
faces=[[0,1,2,3], [4,5,1,0], [7,6,3,2], [5,7,2,1], [6,4,0,3], [4,6,7,5]]
|
|
);
|
|
|
|
// Internal Tub
|
|
translate([wall_thickness, wall_thickness, floor_thickness])
|
|
cube([case_w - (wall_thickness * 2), case_h - (wall_thickness * 2), back_height + 20]);
|
|
|
|
// Plate Recess
|
|
translate([(case_w - recess_w)/2, (case_h - (recess_h * cos(case_angle)))/2, front_height - recess_depth])
|
|
rotate([case_angle, 0, 0])
|
|
cube([recess_w, recess_h, 20]);
|
|
}
|
|
|
|
support_pillars();
|
|
|
|
// Clips (Reduced number for smaller case)
|
|
for (i = [0:2]) {
|
|
z_front = (front_height - recess_depth) + clip_z_offset;
|
|
translate([wall_thickness + (case_w - wall_thickness*2)/4 * (i+1) - clip_width/2, wall_thickness - clip_depth, z_front])
|
|
angled_clip();
|
|
|
|
y_back_wall = case_h - wall_thickness;
|
|
z_back_shelf = (front_height - recess_depth) + (tan(case_angle) * (y_back_wall - wall_thickness));
|
|
z_back_clip = z_back_shelf + clip_z_offset;
|
|
translate([wall_thickness + (case_w - wall_thickness*2)/4 * (i+1) - clip_width/2, y_back_wall - clip_depth * 0.5, z_back_clip])
|
|
angled_clip();
|
|
}
|
|
}
|
|
}
|
|
|
|
// --- Final Render (Single Part) ---
|
|
difference() {
|
|
case_full_geometry();
|
|
usb_cutout();
|
|
}
|
|
controller_holder(); |