first commit

flash.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+if [ -z "$1" ]; then
+    echo "usage: flash.sh <config.yaml> [/dev/tty-usb-device]"
+elif [ -z "$2" ]; then
+    podman run --rm --privileged -v "${PWD}":/config -it ghcr.io/esphome/esphome run $1
+else
+    podman run --rm --privileged -v "${PWD}":/config --device=$2 -it ghcr.io/esphome/esphome run $1
+fi

plants.yaml

@@ -0,0 +1,64 @@
+esphome:
+  name: esp-plants
+  friendly_name: ESP-PLANTS
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+  level: verbose
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret api_key
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  manual_ip:
+    static_ip: 192.168.1.55
+    gateway: 192.168.0.1
+    subnet: 255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Esp32S3N16R8 Fallback Hotspot"
+    password: "v41VUZA7A1VA"
+
+switch:
+  - platform: gpio
+    pin: GPIO15
+    inverted: true
+    name: "water pump relay"
+
+# temperature probe
+one_wire:
+  - platform: gpio
+    pin: GPIO16
+    id: probe1
+
+sensor:
+  - platform: dallas_temp
+    one_wire_id: probe1
+    name: "temperature"
+    update_interval: 30s
+  - platform: adc
+    pin: GPIO6
+    name: "soil moisture sensor, digital"
+    update_interval: 30s
+    attenuation: auto
+  - platform: adc
+    pin: GPIO7
+    name: "soil moisture sensor, analog"
+    update_interval: 30s
+    attenuation: auto
+
+captive_portal: