sensors change

filter_v2_fan.yaml

@@ -5,7 +5,7 @@ esphome:
 esp32:
   board: esp32-s3-devkitc-1
   framework:
-    type: esp-idf
+    type: arduino
     version: latest
 
 logger:
@@ -21,14 +21,9 @@ ota:
 
 wifi:
   networks:
-    - ssid: !secret wifi_ssid
-      password: !secret wifi_password
-      manual_ip:
-        static_ip: 192.168.1.60
-        gateway: 192.168.1.254
-        subnet: 255.255.255.0
-        dns1: 9.9.9.9
-        dns2: 149.112.112.112
+    - ssid: !secret wifi_ssid4
+      password: !secret wifi_password4
+  power_save_mode: none
 
   ap:
     ssid: "Esp32S3N16R8 Fallback Hotspot"
@@ -79,18 +74,17 @@ i2c:
     scl: 20
     sda: 21
     scan: true
+    frequency: 200000 Hz
+
+bme68x_bsec2_i2c:
+  i2c_id: bus_i2c
+  address: 0x77
+  model: bme688
+  operating_age: 28d
+  sample_rate: LP
+  supply_voltage: 3.3V
 
 sensor:
-# ===== SGP40 Indoor Air Quality (VOC) =====
-  - platform: sgp4x
-    voc:
-      name: "VOC Index"
-    i2c_id: bus_i2c
-    address: 0x59
-    update_interval: 30s
-    compensation:
-      temperature_source: aht10_temperature
-      humidity_source:    aht10_humidity
 # ===== PMS5003 PM2.5 Sensor =====
   - platform: pmsx003
     type: PMSX003
@@ -102,70 +96,63 @@ sensor:
       name: "PM <10.0µm Concentration"
     uart_id: uart_pms
     update_interval: 30s
-# ===== AHT10 Temperature & Humidity =====
-  - platform: aht10
+# ===== BME688 Indoor Air Quality =====
+  - platform: bme68x_bsec2
     temperature:
-      name: "AHT10 Temperature"
-      id: aht10_temperature
-    humidity:
-      name: "AHT10 Humidity"
-      id: aht10_humidity
-    address: 0x38
-    i2c_id: bus_i2c
-    update_interval: 30s
-# ===== BME680 Indoor Air Quality =====
-  - platform: bme680
-    temperature:
-      name: "BME680 Temperature"
-      oversampling: 16x
+      name: "BME688 Temperature"
     pressure:
-      name: "BME680 Pressure"
+      name: "BME688 Pressure"
+      id: bme688_pressure
     humidity:
-      id: "humidity"
-      name: "BME680 Humidity"
-    gas_resistance:
-      id: "gas_resistance"
-      name: "BME680 Gas Resistance"
-    address: 0x77
-    i2c_id: bus_i2c
-    update_interval: 60s
-  - platform: template
-    name: "BME680 Indoor Air Quality"
+      name: "BME688 Humidity"
+    iaq:
+      name: "BME688 IAQ"
       id: iaq
-    icon: "mdi:gauge"
-    # calculation: comp_gas = log(R_gas[ohm]) + 0.04 log(Ohm)/%rh * hum[%rh]
-    lambda: |-
-      return log(id(gas_resistance).state) + 0.04 *  id(humidity).state;
-    state_class: "measurement"
+    co2_equivalent:
+      name: "BME688 CO2 Equivalent"
+    breath_voc_equivalent:
+      name: "BME688 Breath VOC Equivalent"
+# ===== SDC41 CO2 =====
+  - platform: scd4x
+    id: scd41
+    measurement_mode: periodic
+    automatic_self_calibration: true
+    update_interval: 60s
+    co2:
+      name: "SDC41 CO2"
+    temperature:
+      name: "SDC41 Temperature"
+    humidity:
+      name: "SDC41 Humidity"
+    ambient_pressure_compensation_source: bme688_pressure
 
 text_sensor:
   - platform: template
-    name: "BME680 IAQ Classification"
-    icon: "mdi:checkbox-marked-circle-outline"
+    name: "BME688 IAQ Classification"
     lambda: |-
       if ( int(id(iaq).state) <= 50) {
         return {"Excellent"};
       }
-      else if (int(id(iaq).state) <= 100) {
+      else if (int(id(iaq).state) >= 51 && int(id(iaq).state) <= 100) {
         return {"Good"};
       }
-      else if (int(id(iaq).state) <= 150) {
+      else if (int(id(iaq).state) >= 101 && int(id(iaq).state) <= 150) {
         return {"Lightly polluted"};
       }
-      else if (int(id(iaq).state) <= 200) {
+      else if (int(id(iaq).state) >= 151 && int(id(iaq).state) <= 200) {
         return {"Moderately polluted"};
       }
-      else if (int(id(iaq).state) <= 250) {
+      else if (int(id(iaq).state) >= 201 && int(id(iaq).state) <= 250) {
         return {"Heavily polluted"};
       }
-      else if (int(id(iaq).state) <= 350) {
+      else if (int(id(iaq).state) >= 251 && int(id(iaq).state) <= 350) {
         return {"Severely polluted"};
       }
-      else if (int(id(iaq).state) <= 500) {
+      else if (int(id(iaq).state) >= 351) {
         return {"Extremely polluted"};
       }
       else {
-        return {"unknown"};
+        return {"error"};
       }
 
 

shutter.yaml

@@ -29,8 +29,10 @@ ota:
 
 wifi:
   networks:
-    - ssid: !secret wifi_ssid3
-      password: !secret wifi_password3
+    - ssid: !secret wifi_ssid5
+      password: !secret wifi_password4
+    - ssid: !secret wifi_ssid4
+      password: !secret wifi_password4
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap: