shutter

shutter.yaml

@@ -0,0 +1,77 @@
+esphome:
+  name: esp-shutter
+  friendly_name: ESP-SHUTTER
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+  level: verbose
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret api_key
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  manual_ip:
+    static_ip: 192.168.1.56
+    gateway: 192.168.0.1
+    subnet: 255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Esp32S3N16R8 Fallback Hotspot"
+    password: "v41VUZA7A1VA"
+
+
+output:
+  - platform: gpio
+    pin: GPIO18
+    id: transistor_1
+  - platform: gpio
+    pin: GPIO17
+    id: transistor_2
+  - platform: gpio
+    pin: GPIO5
+    id: transistor_3
+
+script:
+  - id: pulse_transistor_1
+    then:
+      - output.turn_on: transistor_1
+      - delay: 500ms
+      - output.turn_off: transistor_1
+  - id: pulse_transistor_2
+    then:
+      - output.turn_on: transistor_2
+      - delay: 500ms
+      - output.turn_off: transistor_2
+  - id: pulse_transistor_3
+    then:
+      - output.turn_on: transistor_3
+      - delay: 500ms
+      - output.turn_off: transistor_3
+
+button:
+  - platform: template
+    name: "Shutter Up"
+    on_press:
+      - script.execute: pulse_transistor_1
+  - platform: template
+    name: "Shutter Down"
+    on_press:
+      - script.execute: pulse_transistor_2
+  - platform: template
+    name: "Shutter Stop"
+    on_press:
+      - script.execute: pulse_transistor_3