plants2 + logs

logs.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+if [ -z "$1" ]; then
+    echo "usage: logs.sh <config.yaml> [/dev/tty-usb-device]"
+elif [ -z "$2" ]; then
+    podman run --rm --privileged -v "${PWD}":/config -it ghcr.io/esphome/esphome logs $1
+else
+    podman run --rm --privileged -v "${PWD}":/config --device=$2 -it ghcr.io/esphome/esphome logs $1
+fi
+

plants2.yaml

@@ -0,0 +1,154 @@
+esphome:
+  name: esp-plants
+  friendly_name: ESP-PLANTS
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+  level: verbose
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret api_key
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid4
+  password: !secret wifi_password4
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Esp32S3N16R8 Fallback Hotspot"
+    password: "v41VUZA7A1VA"
+
+mqtt:
+  broker: mqtt.hadow.fr
+  port: 18832
+  username: fire
+  password: !secret mqtt_password
+  topic_prefix: "esp_plants"
+
+i2c:
+  - id: bus_i2c_air_sensor
+    scl: 21
+    sda: 20
+    scan: true
+
+# temperature probes
+one_wire:
+  - platform: gpio
+    pin: GPIO6
+    id: probe0
+  - platform: gpio
+    pin: GPIO7
+    id: probe1
+  - platform: gpio
+    pin: GPIO15
+    id: probe2
+  - platform: gpio
+    pin: GPIO16
+    id: probe3
+  - platform: gpio
+    pin: GPIO17
+    id: probe4
+  - platform: gpio
+    pin: GPIO18
+    id: probe5
+  - platform: gpio
+    pin: GPIO8
+    id: probe6
+
+output:
+  - platform: ledc
+    pin: GPIO5
+    id: pwm_output1
+    frequency: 25000Hz
+
+fan:
+  - platform: speed
+    output: pwm_output1
+    name: "12V pump"
+
+
+sensor:
+  - platform: dallas_temp
+    one_wire_id: probe0
+    name: "temperature 0"
+    update_interval: 30s
+  - platform: dallas_temp
+    one_wire_id: probe1
+    name: "temperature 1"
+    update_interval: 30s
+  - platform: dallas_temp
+    one_wire_id: probe2
+    name: "temperature 2"
+    update_interval: 30s
+  - platform: dallas_temp
+    one_wire_id: probe3
+    name: "temperature 3"
+    update_interval: 30s
+  - platform: dallas_temp
+    one_wire_id: probe4
+    name: "temperature 4"
+    update_interval: 30s
+  - platform: dallas_temp
+    one_wire_id: probe5
+    name: "temperature 5"
+    update_interval: 30s
+  - platform: dallas_temp
+    one_wire_id: probe6
+    name: "temperature 6"
+    update_interval: 30s
+  - platform: adc
+    pin: GPIO4
+    name: "soil moisture sensor, analog"
+    update_interval: 30s
+    attenuation: auto
+  - platform: aht10
+    variant: AHT20
+    i2c_id: bus_i2c_air_sensor
+    temperature:
+      name: "AHT21 Temperature"
+      id: aht21_temperature
+    humidity:
+      name: "AHT21 Humidity"
+      id: aht21_humidity
+    address: 0x38
+    update_interval: 30s
+  - platform: ens160_i2c
+    i2c_id: bus_i2c_air_sensor
+    eco2:
+      name: "ENS160 eCO2"
+    tvoc:
+      name: "ENS160 Total Volatile Organic Compounds"
+    aqi:
+      id: ens160_air_quality_index
+      name: "ENS160 Air Quality Index"
+    compensation:
+      temperature: aht21_temperature
+      humidity: aht21_humidity
+    address: 0x53
+    update_interval: 30s
+
+text_sensor:
+  - platform: template
+    name: "ENS160 Air Quality Rating"
+    lambda: |-
+      switch ( (int) (id(ens160_air_quality_index).state) ) {
+        case 1: return {"Excellent"};
+        case 2: return {"Good"};
+        case 3: return {"Moderate"};
+        case 4: return {"Poor"};
+        case 5: return {"Unhealthy"};
+        default: return {"Not Available"};
+      }
+
+captive_portal: