esphome:
  name: esp-plants
  friendly_name: ESP-PLANTS

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:
  level: verbose

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: 192.168.1.55
    gateway: 192.168.0.1
    subnet: 255.255.255.0

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp32S3N16R8 Fallback Hotspot"
    password: "v41VUZA7A1VA"

# light:
  # - platform: status_led
    # name: "Switch state"
    # pin: GPIO2
    # restore_mode: ALWAYS_OFF

switch:
  - platform: gpio
    pin: GPIO15
    inverted: true
    name: "light pump"
  - platform: gpio
    pin: GPIO17
    inverted: true
    name: "heavy pump"

# temperature probe
one_wire:
  - platform: gpio
    pin: GPIO16
    id: probe1

# # ATH20+BMP280
# i2c:
#   sda: 17
#   scl: 18
#   scan: true
#   id: probe_ath_bmp_1

sensor:
  - platform: dallas_temp
    one_wire_id: probe1
    name: "temperature"
    update_interval: 30s
  - platform: adc
    pin: GPIO6
    name: "soil moisture sensor, digital"
    update_interval: 30s
    attenuation: auto
  - platform: adc
    pin: GPIO7
    name: "soil moisture sensor, analog"
    update_interval: 30s
    attenuation: auto
  # - platform: bmp280_i2c
  #   i2c_id: probe_ath_bmp_1
  #   update_interval: 60s
  #   temperature:
  #     name: "BMP temp"
  #     oversampling: 2x
  #   pressure:
  #     name: "BMP Pressure"
  # - platform: aht10
  #   i2c_id: probe_ath_bmp_1
  #   update_interval: 60s
  #   temperature:
  #     name: "AHT20 temp"
  #     id: aht20_temp
  #     accuracy_decimals: 1

captive_portal: