esphome:
  name: esp-control
  friendly_name: ESP-CONTROL

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
    version: latest

logger:
  level: verbose

api:
  encryption:
    key: !secret api_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  networks:
    - ssid: !secret wifi_ssid
      password: !secret wifi_password
      manual_ip:
        static_ip: 192.168.1.60
        gateway: 192.168.1.254
        subnet: 255.255.255.0
        dns1: 9.9.9.9
        dns2: 149.112.112.112

  ap:
    ssid: "Esp32S3N16R8 Fallback Hotspot"
    password: "v41VUZA7A1VA"

mqtt:
  broker: mqtt.hadow.fr
  port: 18832
  username: fire
  password: !secret mqtt_password
  topic_prefix: "esp_control"


output:
  - platform: ledc
    pin: GPIO5
    id: fan_pwm_output1
    frequency: 25000Hz
  - platform: ledc
    pin: GPIO6
    id: fan_pwm_output2
    frequency: 25000Hz
  - platform: ledc
    pin: GPIO7
    id: fan_pwm_output3
    frequency: 25000Hz

fan:
  - platform: speed
    output: fan_pwm_output1
    name: "12V fan 1"
  - platform: speed
    output: fan_pwm_output2
    name: "12V fan 2"
  - platform: speed
    output: fan_pwm_output3
    name: "12V fan 3"

# ===== PMS5003 PM2.5 Sensor =====
uart:
  id: uart_pms
  rx_pin: 47
  tx_pin: 48
  baud_rate: 9600

i2c:
  - id: bus_i2c
    scl: 20
    sda: 21
    scan: true

sensor:
# ===== SGP40 Indoor Air Quality (VOC) =====
  - platform: sgp4x
    voc:
      name: "VOC Index"
    i2c_id: bus_i2c
    address: 0x59
    update_interval: 30s
    compensation:
      temperature_source: aht10_temperature
      humidity_source:    aht10_humidity
# ===== PMS5003 PM2.5 Sensor =====
  - platform: pmsx003
    type: PMSX003
    pm_1_0:
      name: "PM <1.0µm Concentration"
    pm_2_5:
      name: "PM <2.5µm Concentration"
    pm_10_0:
      name: "PM <10.0µm Concentration"
    uart_id: uart_pms
    update_interval: 30s
# ===== AHT10 Temperature & Humidity =====
  - platform: aht10
    temperature:
      name: "AHT10 Temperature"
      id: aht10_temperature
    humidity:
      name: "AHT10 Humidity"
      id: aht10_humidity
    address: 0x38
    i2c_id: bus_i2c
    update_interval: 30s
# ===== BME680 Indoor Air Quality =====
  - platform: bme680
    temperature:
      name: "BME680 Temperature"
      oversampling: 16x
    pressure:
      name: "BME680 Pressure"
    humidity:
      id: "humidity"
      name: "BME680 Humidity"
    gas_resistance:
      id: "gas_resistance"
      name: "BME680 Gas Resistance"
    address: 0x77
    i2c_id: bus_i2c
    update_interval: 60s
  - platform: template
    name: "BME680 Indoor Air Quality"
    id: iaq
    icon: "mdi:gauge"
    # calculation: comp_gas = log(R_gas[ohm]) + 0.04 log(Ohm)/%rh * hum[%rh]
    lambda: |-
      return log(id(gas_resistance).state) + 0.04 *  id(humidity).state;
    state_class: "measurement"

text_sensor:
  - platform: template
    name: "BME680 IAQ Classification"
    icon: "mdi:checkbox-marked-circle-outline"
    lambda: |-
      if (int(id(iaq).state) <= 50) {
        return {"Excellent"};
      }
      else if (int(id(iaq).state) <= 100) {
        return {"Good"};
      }
      else if (int(id(iaq).state) <= 150) {
        return {"Lightly polluted"};
      }
      else if (int(id(iaq).state) <= 200) {
        return {"Moderately polluted"};
      }
      else if (int(id(iaq).state) <= 250) {
        return {"Heavily polluted"};
      }
      else if (int(id(iaq).state) <= 350) {
        return {"Severely polluted"};
      }
      else if (int(id(iaq).state) <= 500) {
        return {"Extremely polluted"};
      }
      else {
        return {"unknown"};
      }



captive_portal: